Patient information: uses, side effects, how to take - Sodium Chloride, Lactate, Potassium Chloride, and Calcium Chloride Injection
Directions for Use of PIC™ (Plastic Irrigation Container)
Not for injection.
Aseptic technique is required.
- 1.
Caution – Before use, perform the following checks:
- (a) Read the label. Ensure solution is the one ordered and is within the expiration date.
- (b) Invert container and inspect the solution in good light for cloudiness, haze, or particulate matter; check the container for leakage or damage. Any container which is suspect should not be used.
Use only if solution is clear and container and seal are intact.
Single-dose container. Discard unused portion.
- 2.
Outer Closure Removal – Grasp the container with one hand and turn the breakaway ring counterclockwise with the other hand until slight resistance is felt. Then, twisting the container in the opposite direction, turn the breakaway ring sharply until the entire outer cap is loose and can be lifted off. (Figure 1)

- 3.
Connect the administration set through the sterile set port according to set instructions (Figure 2) or remove screw cap and pour.

- 4. Do not warm above 150°F (66°C) to assure minimal bottle distortion. Keep bottles upright.
