Patient information: uses, side effects, how to take - Armlupeg
What is Armlupeg?
Armlupeg is a prescription medicine that is used:
in adults and children aged newborn and older to help reduce the chance of infection due to a low white blood cell count, in people with certain types of cancer (non-myeloid), who receive anti-cancer medicines (chemotherapy) that can cause fever and low blood cell count.
in adults and children aged newborn and older for acute radiation syndrome. The effectiveness of pegfilgrastim for this use was only studied in animals, because it could not be studied in people.
Do not take Armlupeg if you have had a serious allergic reaction to pegfilgrastim products or filgrastim products.
Before you receive Armlupeg, tell your healthcare provider about all of your medical conditions, including if you:
have a sickle cell disorder.
have kidney problems.
are allergic to latex. The needle cap on the prefilled syringe contains dry natural rubber (derived from latex). You should not give Armlupeg using the prefilled syringe if you have latex allergies.
are pregnant or plan to become pregnant. It is not known if Armlupeg will harm your unborn baby.
are breastfeeding or plan to breastfeed. It is not known if Armlupeg passes into your breast milk.
Tell your healthcare provider about all of the medicines you take, including prescription and over-the counter medicines, vitamins, and herbal supplements.
How will I receive Armlupeg?
Armlupeg is given as an injection under your skin (subcutaneous injection) by a healthcare provider. If your healthcare provider decides that the subcutaneous injections can be given at home by you or your caregiver, follow the detailed "Instructions for Use" that comes with your Armlupeg for information on how to prepare and inject a dose of Armlupeg using the single-dose prefilled syringe.
You and your caregiver will be shown how to prepare and inject Armlupeg using the single-dose prefilled syringe before you use it.
You should not inject a dose of Armlupeg to children weighing less than 99 pounds (45 kg) from an Armlupeg prefilled syringe.
If you are receiving Armlupeg because you are also receiving chemotherapy, the last dose of Armlupeg should be injected at least 14 days before and 24 hours after your dose of chemotherapy.
If you miss a dose of Armlupeg, talk to your healthcare provider about when you should give your next dose.
If you inject too much Armlupeg, call your healthcare provider or Poison Help line at 1-800-222-1222 or go to the nearest hospital emergency room right away.
What are possible side effects of Armlupeg?
Armlupeg may cause serious side effects, including:
Spleen rupture. Your spleen may become enlarged and can rupture. A ruptured spleen can cause death. Call your healthcare provider right away if you have pain in the left upper stomach area or your left shoulder.
A serious lung problem called Acute Respiratory Distress Syndrome (ARDS). Call your healthcare provider or get emergency help right away if you have shortness of breath with or without a fever, trouble breathing, or a fast rate of breathing.
Serious allergic reactions. Allergic reactions can cause a rash over your whole body, shortness of breath, wheezing, dizziness, swelling around your mouth or eyes, fast heart rate, and sweating. If you have any of these symptoms, stop using Armlupeg and call your healthcare provider or get emergency medical help right away.
Sickle cell crises in people with sickle cell disorder. You may have a severe sickle cell crisis, which could lead to death. Call your healthcare provider right away if you have symptoms of sickle cell crisis such as pain or difficulty breathing.
Kidney injury. Call your healthcare provider right away if you develop any of the following symptoms:
- swelling of your face or ankles
- blood in your urine or dark colored urine
- you urinate less than usual
Increased white blood cell count (leukocytosis). Your healthcare provider will check your blood count during treatment with Armlupeg.
Decreased platelet count (thrombocytopenia). Your healthcare provider will check your blood count during treatment with Armlupeg. Tell your healthcare provider if you have unusual bleeding or bruising during treatment with Armlupeg.
Capillary Leak Syndrome (CLS). Armlupeg can cause fluid to leak from blood vessels into your body's tissues. CLS can quickly cause you to have symptoms that may become life-threatening. Get emergency medical help right away if you develop any of the following symptoms:
- swelling or puffiness and are urinating less than usual
- trouble breathing
- swelling of your stomach area (abdomen) and feeling of fullness
- dizziness or feeling faint
- a general feeling of tiredness
Myelodysplastic Syndrome (MDS) and Acute Myeloid Leukemia (AML). If you have breast cancer or lung cancer, when Armlupeg is used with chemotherapy and radiation therapy, or with radiation therapy alone, you may have an increased risk of developing a precancerous blood condition called MDS or a blood cancer called AML. Call your healthcare provider if you develop any symptoms of MDS and AML, including tiredness, fever, or easy bruising or bleeding.
Inflammation of the arteries (arteritis) . Serious inflammation of the large and medium blood vessels that carry blood from your heart to the body, including the aorta (the largest artery), can happen in people receiving Armlupeg. Tell your healthcare provider right away if you develop fever, stomach (abdominal) pain, back pain, headache, neck pain, or generally feel unwell.
The most common side effects of Armlupeg are pain in the bones, arms, and legs.
These are not all the possible side effects of Armlupeg.
Call your healthcare provider for medical advice about side effects. You may report side effects to FDA at 1-800-FDA-1088.
How should I store Armlupeg single-dose prefilled syringes?
Store Armlupeg in the refrigerator between 36°F to 46°F (2°C to 8°C).
Do not freeze. If Armlupeg is accidentally frozen, allow the prefilled syringe to thaw in the refrigerator before injecting.
Do not use an Armlupeg prefilled syringe that has been frozen more than 1 time. Throw it away and use a new Armlupeg prefilled syringe.
Keep Armlupeg in the original carton to protect from light or physical damage.
Do not shake Armlupeg.
Take Armlupeg out of the refrigerator 30 minutes before use and allow it to reach room temperature, 68°F to 77°F (20°C to 25°C), before preparing an injection.
Throw away (dispose of) any Armlupeg that has been left at room temperature, 68°F to 77°F (20°C to 25°C), for more than 48 hours.
Keep Armlupeg and all medicines out of the reach of children.
General information about the safe and effective use of Armlupeg.
Medicines are sometimes prescribed for purposes other than those listed in a Patient Information leaflet. Do not use Armlupeg for a condition for which it was not prescribed. Do not give Armlupeg to other people, even if they have the same symptoms that you have. It may harm them. You can ask your pharmacist or healthcare provider for information about Armlupeg that is written for health professionals.
What are the ingredients in Armlupeg?
Active ingredient : pegfilgrastim-unne
Inactive ingredients : glacial acetic acid, polysorbate 20, sodium acetate, sorbitol in Water for Injection.
LUPIN and the
are registered trademarks of Lupin Pharmaceuticals, Inc.
Manufactured by:
Lupin Limited (Biotech Division)
Gat No. 1156, 1157, 1158, 1159 and 1160,
Village-Ghotawade, Taluka-Mulshi,
Pune – 412115, Maharashtra, India
Distributed by:
Valorum Biologics, LLC
555 Madison Ave. Suite 11D
New York, NY USA 10022
US License No. 2052
For more information contact Valorum Biologics, LLC at 1-844-576-2709 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch
INSTRUCTIONS FOR USE SECTION
Instructions for Use
ARMLUPEG® (arm loo peg)
(pegfilgrastim-unne)
injection, for subcutaneous use
Single-Dose Prefilled Syringe
Guide to parts


Important: The needle is covered by the gray needle cap before use.
Important
Read the Patient Information for important information you need to know about Armlupeg before using these Instructions for Use.
Before you use an Armlupeg prefilled syringe, read this important information.
Storing the prefilled syringe
Store Armlupeg in the refrigerator between 36°F to 46° F (2°C to 8°C).
Do not freeze. If Armlupeg is accidentally frozen, allow the prefilled syringe to thaw in the refrigerator before injecting.
Do not use an Armlupeg prefilled syringe that has been frozen more than 1 time. Throw it away and use a new Armlupeg prefilled syringe.
Keep the prefilled syringe in the original carton to protect from light or physical damage.
Throw away (dispose of) any Armlupeg that has been left at room temperature, 68°F to 77°F (20°C to 25°C), for more than 48 hours.
Keep Armlupeg and all medicines out of the reach of children.
Using the prefilled syringe
It is important that you do not try to give the injection unless you or your caregiver has received training from your healthcare provider.
Make sure the name Armlupeg appears on the carton and prefilled syringe label.
Check the carton and prefilled syringe label to make sure the dose strength is 6 mg.
You should not inject a dose of Armlupeg to children weighing less than 99 pounds (45 kg) from an Armlupeg prefilled syringe.
Do not use a prefilled syringe after the expiration date on the label.
Do not shake the prefilled syringe.
Do not remove the gray needle cap from the prefilled syringe until you are ready to inject.
Do not use the prefilled syringe if the carton is open or damaged.
Do not use a prefilled syringe if it has been dropped on a hard surface. The prefilled syringe may be broken even if you cannot see the break. Use a new prefilled syringe.
Do not attempt to activate the needle safety guard prior to injection. Do not use the prefilled syringe if the needle safety guard has been activated. Use another prefilled syringe that has not been activated and is ready to use.
The gray needle cap on the prefilled syringe contains dry natural rubber (made from latex). Tell your healthcare provider if you are allergic to latex. You should not give Armlupeg using the prefilled syringe if you have latex allergies.
Call your healthcare provider if you have any questions.
STEP 1: Prepare
A. Remove the prefilled syringe carton from refrigerator.
Check the expiration date printed on the carton.
Important: Do not use if the expiration date has passed.
Remove the syringe tray from the carton. On a clean, well-lit surface, place the syringe tray at room temperature, 68°F to 77°F (20°C to 25°C) for 30 minutes before you give an injection.
Do not use the prefilled syringe if the carton is damaged.
Do not try to warm the prefilled syringe by using a heat source such as hot water or microwave.
Do not leave the prefilled syringe in direct sunlight.
Do not shake the prefilled syringe.
Open the tray by peeling away the cover. Grab the safety guard to remove the prefilled syringe from the tray. (See Figure 3)

For Safety reasons:
B. Inspect the medicine and prefilled syringe (See Figure 4).

Make sure the medicine in prefilled syringe is clear and colorless (See Figure 4). It is normal to see one or more air bubbles in the syringe.
Do not use the prefilled syringe if:
The medicine is cloudy or discolored or contains flakes or particles.
Any part appears cracked or broken.
The prefilled syringe has been dropped.
The gray needle cap is missing or not securely attached.
The expiration date printed on the label has passed.
In all cases, use a new prefilled syringe and call your healthcare provider.
C. Gather all materials needed for injection (See Figure 5)
Wash your hands thoroughly with soap and water
On a clean, well-lit work surface, place the:
Prefilled syringe
Alcohol swab
Cotton ball or gauze pad
Adhesive bandage
Sharps disposal container

STEP 2: Get ready
D. Select and clean the injection site (See Figures 6 and 7).

You can use:
Clean the injection site with an alcohol swab (See Figure 7). Let the skin dry.

Do not touch this area again before injecting.
If you want to use the same injection site, make sure it is not the same spot on the injection site you used for a previous injection.
Do not inject into areas where the skin is tender, bruised, red, or hard. Avoid injecting into areas with scars or stretch marks.
E. Hold the prefilled syringe by the syringe body. Carefully pull the gray needle cap straight off and away from the body (See Figure 8).

Do not remove the gray needle cap from the prefilled syringe until you are ready to inject.
Do not twist or bend the needle cap.
Do not hold the prefilled syringe by the plunger rod
Do not put the gray needle cap back onto the syringe.
Important: Throw the gray needle cap into the sharps disposal container (See Figure 9).

Step 3: Subcutaneous (under the skin) injection
F. Pinch the injection site to create a firm surface (See Figure 10).

Important: Keep skin pinched while injecting
G. Hold the pinch. Insert the needle into the skin at 45 to 90 degrees. (See Figure 11)

H. Using slow and constant pressure, push the plunger head until it reaches the bottom. When done, gently pull the syringe off of the skin. (See Figure 12)

Important: When you remove the syringe, if it looks like the needle safety guard is not activated or some medicine is still left in the syringe, this means you have not received a full dose. Call your healthcare provider right away.
Step 4: Finish

I. For your safety, make sure that the needle safety guard is activated and fully covers the needle.
Once the needle safety guard is extended, it will lock into position and will not slide back over the needle.
Important: Keep your hands away from the needle at all times.
J. Discard (throw away) the used prefilled syringe.

Put the used prefilled syringe into an FDA-cleared sharps disposal container right away after use (See Figure 13). Do not throw away (dispose of) the syringe in the household trash.
If you do not have an FDA-cleared sharps disposal container, you may use a household container that is:
- made of a heavy-duty plastic,
- can be closed with a tight-fitting, puncture-resistant lid, without sharps being able to come out,
- upright and stable during use,
- leak-resistant, and
- properly labeled to warn of hazardous waste inside the container.
When your sharps disposal container is almost full, you will need to follow your community guidelines for the right way to dispose of your sharps disposal container. There may be state or local laws about how you should throw away used needles and syringes. For more information about safe sharps disposal, and for specific information about sharps disposal in the state that you live in, go to the FDA's website at: http://www.fda.gov/safesharpsdisposal.
Do not reuse the prefilled syringe.
Do not recycle prefilled syringes or sharps disposal container or throw them into household trash.
Important: Always keep the sharps disposal container out of the reach of children.
K. Examine the injection site.
If there is blood, press a cotton ball or gauze pad on the injection site. Do not rub the injection site. Apply an adhesive bandage if needed.
This Instructions for Use has been approved by the U.S. Food and Drug Administration.
LUPIN and the
are registered trademarks of Lupin Pharmaceuticals, Inc.
Manufactured by:
Lupin Limited (Biotech Division)
Gat No. 1156, 1157, 1158, 1159 and 1160,
Village-Ghotawade, Taluka-Mulshi,
Pune – 412115, Maharashtra, India
Distributed by:
Valorum Biologics, LLC
555 Madison Ave. Suite 11D
New York, NY USA 10022
U.S. License No. 2052
Revised: 10/2026
