Patient information: uses, side effects, how to take - Terconazole

INSTRUCTIONS FOR USE

Instructions for Use

TERCONAZOLE VAGINAL CREAM (ter kon ah zol)

For vaginal use only. Do not put Terconazole vaginal cream in your eyes or mouth.

Be sure to read, understand, and follow the instructions below for how to use Terconazole vaginal cream, correctly.

Important Information

Use Terconazole vaginal cream exactly as your healthcare provider tells you to use it.
Use1 full applicator of terconazole vaginal cream in the vagina each night at bedtime for 3 days in a row.
Do not stop using Terconazole vaginal cream before your healthcare provider tells you to, even if you feel better very quickly. Your infection may not clear up completely.
If you have questions or if your vaginal symptoms do not go away, contact your healthcare provider.

How should I store terconazole vaginal cream?

Store Terconazole vaginal cream at room temperature between 68°F to 77°F (20°C to 25°C).

Keep Terconazole vaginal cream and all medicines out of the reach of children.

Step 1. Gather your supplies. (Figure 1) 1 Terconazole vaginal cream tube 1 empty reusable applicator, to fill and give the dose of medicine.
Step 2. Wash your hands.
Step 3. Prepare the Applicator: Remove the cap from the Terconazole vaginal cream tube. Use the pointed tip on the top of the cap to puncture the seal on the tube. (See Figure 2) Screw the applicator onto the tube. Squeeze the tube from the bottom and fill the applicator until the plunger stops. (See Figure 3) Unscrew the applicator from the tube.
Step 4. Insert the Terconazole vaginal cream: Lie on your back with knees drawn up toward your chest. Holding the applicator by the ribbed end of the barrel, insert the filled applicator into the vagina as far as it will comfortably go. (See Figure 4) Slowly press the plunger of the applicator to release the cream into the vagina. Remove the applicator from the vagina. Wash the applicator.
Step 5. Wash the Applicator after Use Wash the applicator after each use. Pull the plunger out of the barrel. (See Figure 5) Wash the applicator pieces with lukewarm, soapy water and then dry them very well. Put the dry applicator pieces back together by gently pushing the plunger into the barrel as far as it will go.
Step 6. Wash your hands well after you finish washing and drying the applicator.
Step 7. Repeat Steps 1 through Step 6 until you finish your course of treatment.
Step 8. When you have finished your treatment, throw away (dispose of) the used applicator and tube in your household trash.