Patient information: uses, side effects, how to take - Cordran Topical Tape
DIRECTIONS FOR USE
APPLICATION OF MEDICATED TRANSPARENT TAPE
Rx only
| IMPORTANT: Skin should be clean and dry before tape is applied. Tape should always be cut, never torn. |
- Prepare skin as directed by your physician or as follows: Gently clean the area to be covered to remove scales, crusts, dried exudates, and any previously used ointments or creams. A germicidal soap or cleanser should be used to prevent the development of odor under the tape. Shave or clip the hair in the treatment area to allow both good contact with the skin and comfortable removal. If a shower or tub bath is to be taken, it should be completed before the tape is applied. The skin should be dry before application of the tape.
Remove tape from flip-top vial and cut a piece slightly larger than area to be covered. Round off corners.
Return remainder of tape roll to vial and tightly close the lid.
Pull white paper backing from transparent tape. Be careful that tape does not stick to itself.
- Apply tape, keeping skin smooth; press tape into place.
REPLACEMENT OF TAPE
Unless instructed otherwise by your physician, replace tape after 12 hours. Cleanse skin and allow it to dry for 1 hour before applying new tape.
DISPENSING THE TAPE
To use the roll as a dispenser, pull the tape as illustrated.
IF IRRITATION OR INFECTION DEVELOPS, REMOVE TAPE AND CONSULT PHYSICIAN.
Store at 20 - 25℃ (68 - 77℉). [See USP controlled room temperature.]
Keep Cordran Tape in the original container. Do not repackage. Protect from moisture. Keep vial tightly closed in a dry place.
Keep out of reach of children.
Rx only
Manufactured for:
Almirall, LLC
Malvern, PA 19355
© 2019 Almirall, LLC. All rights reserved.
Cordran® is a registered trademark of Almirall, LLC.
almirall
Content Updated: June 2022