Patient information: uses, side effects, how to take - Yuviwel
What is YUVIWEL?
YUVIWEL is a prescription medicine used to increase linear growth in children 2 years of age and older with achondroplasia whose growth plates (epiphyses) are open.
Before you give YUVIWEL to your child, tell the healthcare provider about all of your child´s medical conditions, including if your child:
- has kidney problems.
- is pregnant or plans to become pregnant. It is not known if YUVIWEL will harm the unborn baby.
- is breastfeeding or plans to breastfeed. It is not known if YUVIWEL passes into the breast milk. Talk to your child's healthcare provider about the best way to feed your child´s baby, if your child receives YUVIWEL.
Tell the healthcare provider about all the medicines your child takes, including prescription and over-the-counter medicines, vitamins, and herbal supplements.
Know the medicines your child takes. Keep a list of them to show your child's healthcare provider and pharmacist when your child gets a new medicine.
How should I give YUVIWEL?
Read the detailed Instructions for Use that comes with your child's YUVIWEL for information on how to store, prepare, and give YUVIWEL, as well as how to throw away (dispose of) YUVIWEL the right way.
- Use YUVIWEL exactly as instructed by your child's healthcare provider.
- If YUVIWEL has been stored in the refrigerator, let the vial and Prefilled Diluent Syringe sit at room temperature for about 30 minutes before use.
- YUVIWEL is given as an injection under the skin (subcutaneous). YUVIWEL can be injected in either the stomach area (2 inches from the belly button) or thighs. If a caregiver gives the YUVIWEL injection, the buttocks or the back of the upper arms can be used as injection sites. Choose a different injection site each time. Avoid injecting where skin is red, swollen, or scarred.
- Your child´s healthcare provider will show you how to prepare and inject YUVIWEL the right way before you use it for the first time at home.
- Inject YUVIWEL 1 time each week on the scheduled dosing day. You can choose any time during the day to give your child the injection.
- If your child misses a dose of YUVIWEL, give the missed dose as soon as possible but not more than 2 days after the missed dosing day. To avoid missed doses, YUVIWEL can be given up to 2 days before or 2 days after the scheduled dosing day. If more than 2 days have passed, your child should skip the missed dose, and the next dose should be given on the regularly scheduled dosing day. In both cases, your child can go back to the regular 1 time each week dosing schedule. At least 5 days must pass between doses.
- In case you are not sure when to inject YUVIWEL, call your child´s healthcare provider or pharmacist. Do not give YUVIWEL more often than as directed by the healthcare provider.
- Your child's dose of YUVIWEL depends on body weight. The healthcare provider will tell you which strength of YUVIWEL to use and how much to give to your child.
- Your healthcare provider will monitor your child's growth and instruct you on when your child should stop using YUVIWEL if they determine that your child is no longer able to grow. Stop giving YUVIWEL to your child if instructed by your child's healthcare provider.
What are the possible side effects of YUVIWEL?
YUVIWEL may cause serious side effects, including:
- risk of low blood pressure. If your child experiences a decrease in blood pressure or symptoms of low blood pressure (dizziness, feeling tired, and/or nausea) while being treated with YUVIWEL, call your child's healthcare provider.
The most common side effects of YUVIWEL include:
Injection site reactions like redness, itching, skin discoloration, bleeding, swelling, bruising, pain and small fluid-filled blisters that form at the injection site.
These are not all the possible side effects of YUVIWEL. For more information, ask your child´s healthcare provider or pharmacist.
Call your healthcare provider for medical advice about side effects. You may report side effects to FDA at 1-800-FDA-1088.
How should I store YUVIWEL?
- Store YUVIWEL in the refrigerator between 36°F to 46°F (2°C to 8°C) in the original carton to protect from light.
- Do not freeze YUVIWEL.
- YUVIWEL can also be stored at room temperature up to 86°F (30°C) for up to 6 months and can be returned to the refrigerator within the 6 months. Do not use YUVIWEL past the expiration date or 6 months after the date it was first removed from the refrigerator (whichever comes first).
- After mixing, YUVIWEL can be stored at room temperature up to 86°F (30°C) and must be used within 4 hours. Throw away unused medicine. Throw away medicine if not used within 4 hours after mixing.
Keep YUVIWEL and all medicines out of the reach of children.
General information about the safe and effective use of YUVIWEL.
Medicines are sometimes prescribed for purposes other than those listed in a Patient Information leaflet. Do not use YUVIWEL for a condition for which it was not prescribed. Do not give YUVIWEL to other people, even if they have the same symptoms that your child has. It may harm them. You can ask a pharmacist or healthcare provider for information about YUVIWEL that is written for health professionals.
What are the ingredients in YUVIWEL?
Active ingredients: navepegritide
Inactive ingredients: succinic acid, trehalose dihydrate, tromethamine and hydrochloric acid. The diluent contains Sterile Water for Injection, USP.
Manufactured for:
Ascendis Pharma Growth Disorders A/S
Tuborg Boulevard 12,
DK-2900 Hellerup, Denmark
For more information, go to www.YUVIWEL.com, or call Ascendis Signature Access Program® (A·S·A·P) at 1-844-442-7236. Ascendis Pharma Endocrinology Inc., Princeton, New Jersey 08540, USA
© 2026 Ascendis Pharma. All rights reserved. YUVIWEL®, Ascendis®, TransCon®, the Ascendis Pharma logo and the company logo are trademarks owned by the Ascendis Pharma Group.
INSTRUCTIONS FOR USE
Yuviwel® (YOU-vih-well)
(navepegritide) for injection, for subcutaneous use
Ascendis Pharma
For Use Under the Skin Only (subcutaneous)
Single-Dose Vial
Discard unused Portion
1 time a week injection
This leaflet contains:
PRESCRIBING INFORMATION and
INSTRUCTIONS FOR USE
Additional information
If you need help, please ask your healthcare provider for advice. You may also call the Ascendis Pharma Customer Support toll-free number at 1-844-442-7236 (1-844-44ASCENDIS) for assistance or additional training, if needed.

Yuviwel.com
This Instructions for Use contains information on how to prepare and inject Yuviwel.
Parts Overview
Step 1

Important: Do not use preparation needle for injection
Step 2 and Step 3

Important: Do not use preparation needle for injection
Supplies Not Included:
You will also need a sharps disposal container and alcohol wipes.
Get to know Yuviwel
Make sure you have received training from your healthcare provider before injecting.
Read and follow the Instructions for Use step-by-step to make sure you inject Yuviwel the right way.
Important: Prior to use, read the Instructions for Use carefully even if you have used a similar product. The steps may not be the same.
If you are blind or visually impaired, do not use Yuviwel without help from a person who is trained to use it.
How Yuviwel is supplied and injected
Yuviwel is injected under the skin (subcutaneous injection) 1 time a week.
Each Yuviwel carton includes 4 Kits, with 1 Prescribing Information and 1 Instructions for Use.
Yuviwel is available in the following strengths:
| 1.3 mg/vial | 2.8 mg/vial | 5.5 mg/vial |
Always check that you inject the dose strength prescribed by your healthcare provider.
If you are injecting yourself with Yuviwel, you should use the stomach area (2 inches from belly button) or thighs as injection sites.
If someone else gives you the Yuviwel injection, the buttocks or the back of the upper arms can be used as injection sites.
Only inject into injection sites instructed by your healthcare provider.
Important before starting Yuviwel
Check all parts and their packaging for signs of damage.
Do not use if any parts or packaging appear damaged. Use a new Kit.
Your healthcare provider may prescribe a dose that is more than 1 milliliter (mL) and requires the use of two Kits to deliver two injections for a complete dose.
If you have been prescribed a dose that is more than 1 mL:
- Prepare and give your first injection, using one Kit (follow Steps 1 through 3.10)
- Then, using a new Kit, immediately prepare and give a second injection by repeating steps 1 through 3.10.
Check the expiration date on the Kit. Do not use Yuviwel if expired. Use a new Kit.
Only use the vial, needles, and syringes that come in your Kit.
If you do not have an alcohol wipe, use soap and water to clean the injection site and the grey rubber at the top of the vial.
The vial, needles, and syringes in the Kit are for one time use only.
Do not reuse any of the parts. Do not recap needles.
Be careful when handling needles to reduce the risk of needlestick injury and infection.
Do not throw away opened or used needles in your household trash. Use a sharps disposal container.
After unpacking and to avoid contamination, do not touch the top of the vial, the tip of the Prefilled Diluent Syringe or the tip of the injection syringe.

Do not change the injection angle after the needle has been inserted into the skin. Changing the angle can cause the needle to bend or break off under the skin. If a needle breaks in your skin, get medical help right away.
Throwing away Yuviwel parts
Throw away (dispose of) used needles, syringes and the vial in an FDA-cleared sharps disposal container right away after use.
- Do not throw away (dispose of) used needles and syringes in the household trash.
- Do not reuse needles. Always use a new needle for each injection.
If you do not have an FDA-cleared sharps disposal container, you may use a household container that is:
- Made of heavy-duty plastic,
- Can be closed with a tight-fitting, puncture resistant lid, without sharps being able to come out,
- Upright and stable during use,
- Leak-resistant, and
- Properly labeled to warn of hazardous waste inside the container
When your sharps disposal container is almost full, you will need to follow your community guidelines for the right way to dispose of your sharps disposal container. There may be state or local laws about how you should throw away used needles and syringes.
For more information about safe sharps disposal, and for specific information about sharps disposal in the state that you live in, go to the FDA's website at: www.fda.gov/safesharpsdisposal
Storing Yuviwel
Store Yuviwel refrigerated between 36°F to 46°F (2°C to 8°C) in the original carton to protect from light. Do not freeze. Yuviwel can also be stored at room temperature up to 86°F (30°C) for up to 6 months and can be returned to the refrigerator within the 6 months.
Do not use Yuviwel past the expiration date or 6 months after the date it was first removed from the refrigerator (whichever comes first).
Keep Yuviwel and all medicines out of the reach of children. Small parts in the Kit may cause a choking hazard for children and pets.
Yuviwel does not contain preservatives. After mixing, Yuviwel can be stored at room temperature up to 86°F (30°C) and must be used within 4 hours. Throw away unused medicine. Throw away medicine if not used within 4 hours after mixing.
Step 1
Prepare medicine
Gather supplies:
1 Kit, 2 alcohol wipes and a sharps disposal container.
Note: If the Kit has been stored in the refrigerator, let the vial and Prefilled Diluent Syringe sit at room temperature for about 30 minutes before mixing (reconstitution).

![]() | 1.1 Wash hands with soap and water or use hand sanitizer. |
1.2 Flip off the cap of the vial (See A). You can use 1 or 2 hands to remove the cap. |
![]() | 1.3 Wipe the grey rubber at the top of the vial with an alcohol wipe (See B). |
| Do not touch the top after cleaning it. |
![]() | 1.4 Break off the white cap of the Prefilled Diluent Syringe (See C). |
Do not touch the tip of the Prefilled Diluent Syringe after breaking off the cap. Be careful not to push the plunger rod to avoid spilling diluent. If you spill diluent, use a new Kit. |
![]() | 1.5 Unpack preparation needle and screw it on the Prefilled Diluent Syringe (See D). |
![]() | 1.6 Pull back the safety shield and remove the needle cap (See E). |
Throw away (dispose of) the needle cap. If the safety shield locks, use a new Kit. |
![]() | 1.7 Insert preparation needle into the center of the circle on top of the vial (See F). |
| 1.8 Push all the diluent into the vial (See F). | |
| 1.9 Pull preparation needle out of the vial. |
![]() | 1.10 To avoid a needle stick injury, push the safety shield over preparation needle with 1 hand or press the shield against a hard surface directly after use until you hear it click and it locks (See G). |
| 1.11 Place the Prefilled Diluent Syringe and preparation needle in the sharps disposal container. |
![]() | 1.12 Hold the glass part of the vial and shake up and down for 15 seconds (See H). Do not swirl or roll as the medicine will not be fully mixed. |
![]() | 1.13 Put the vial down and leave it for 5 minutes to let the medicine settle (See I). |
| 1.14 Check the medicine. The medicine should be clear and colorless. You may see air bubbles. This is normal. | |
Do not use the medicine if you see particles. Throw away medicine if not used within 4 hours after mixing. |
Step 2
Prepare injection
![]() | 2.1 Unpack the injection syringe and a new preparation needle. |
| 2.2 Screw a new preparation needle on the injection syringe (See J). | |
2.3 Pull back the safety shield and remove the needle cap. Do not remove needle cap until ready to continue. If the safety shield locks unexpectedly, use a new Kit. |
![]() | 2.4 Pull the plunger rod out to draw air into the injection syringe equal to the prescribed Yuviwel dose in milliliters (mL) (See K). |
| This is needed to withdraw the right dose. |
![]() | 2.5 Insert preparation needle into the center of the circle on top of the vial and inject the air (See L). |
| 2.6 Turn the vial and the injection syringe upside down. |
![]() | 2.7 Position preparation needle within the liquid to allow the medicine to be withdrawn. |
| If you insert the needle all the way in, you will only draw air and no medicine (See M). | |
| Turn the vial to the gap in the vial label to see the medicine better. |
![]() | 2.8 Withdraw the prescribed dose, by pulling and pushing the plunger to remove air gaps and large air bubbles (See N). |
| Tapping the injection syringe may help air rise to the top. | |
Before you continue: Check for air gaps at the top of the syringe. Check for large air bubbles. If you see any air gaps or large air bubbles, pull and push the plunger to remove. Small air bubbles are okay (See N). |
![]() | 2.9 Check that you have the right dose (See O). |
| The plunger has 2 rings. Your dose should be in line with the top ring of the black part of the plunger. | |
| If you did not withdraw the right dose, go back to step 2.7. | |
| 2.10 Pull preparation needle out of the vial. |
![]() | 2.11 Lock the safety shield over the preparation needle (See G). |
| 2.12 Rest the injection syringe carefully on the table while you unpack the injection needle (See P). |
Step 3
Inject and throw away
![]() | 3.1 Gather the injection needle from the Kit. |
| 3.2 Twist and pull off the short needle cap of the injection needle (See Q). | |
| Twisting both ways on the needle may help. You may have to twist hard. |
![]() | 3.3 Unscrew the used preparation needle and place in the sharps disposal container (See R). |
![]() | 3.4 Screw the injection needle onto the injection syringe (See S). |
![]() | 3.5 Choose a site for injection. You can inject in either the stomach area (2 inches from the belly button) or thighs (See T). |
| Choose a different injection site each time. | |
| If someone else gives you the Yuviwel injection, the buttocks or the back of the upper arms can be used as injection sites (See T and U). | |
![]() | Avoid injecting where skin is red, swollen, or scarred. |
![]() | 3.6 Clean the injection site with an alcohol wipe (See V). |
![]() | 3.7 Pull off the long needle cap of the injection needle (See W). |
![]() | 3.8 Insert the injection needle into the skin at a 45-degree angle. You can use 1 or 2 hands to inject. Inject the dose by slowly pushing down the plunger rod (See X). |
| This may take some time, depending on the dose. | |
| 3.9 Pull out the injection needle from the skin. | |
| Do not recap the needle. | |
| 3.10 Place the injection needle and all other parts, including the vial and any remaining medicine, in the sharps disposal container. |
Important
If your Yuviwel dose is more than 1 mL each week:
If your prescribed dose is more than 1 mL, get a new Kit and repeat steps 1 through 3.10 to give a second injection for a complete dose. The second injection must be given right after the first injection, using a different injection site.
Remember to choose a different injection site for each Yuviwel injection.
Do not reuse any parts for the 2 injections.
This Instructions for Use has been approved by the U.S. Food and Drug Administration
Approved: 2/2026
























