Patient information: uses, side effects, how to take - Metronidazole Injection
Directions for Use
CAUTION: DO NOT ADD SUPPLEMENTARY MEDICATIONS.
For intravenous infusion only
Store the individual container in the aluminum overwrap until ready to use.
Use sterile equipment.
Before use, perform the following checks:
Read the label. Ensure solution is the one ordered and is within the expiration date.
Inspect the solution in good light for cloudiness, haze or particulate matter; check for minute leaks by squeezing the bag firmly. Any container which is suspect should not be used. If leaks are found, discard container as sterility may be compromised.
Use only if solution is clear and the container is undamaged.
Single dose plastic container. Discard unused portion.
Consult Package Insert for complete product information.
Preparation for Administration
- 1. Close flow control clamp of administration set.
- 2. Caution – adding additives into the Metronidazole Injection solution bag is prohibited. If used with a primary intravenous fluid system, the primary solution should be discontinued during metronidazole infusion. Do not use equipment containing aluminum (e.g., needles, cannulae, etc.) that may contact the drug solution.
- 3. Remove cover from port at bottom of container.
- 4.
Insert piercing pin of administration set into port with a twisting motion until the pin is firmly seated.
NOTE: See full directions on administration set carton.
- 5. Suspend container from hanger.
- 6. Squeeze and release drip chamber to establish proper fluid level in chamber during infusion of Metronidazole Injection.
- 7. Open flow control clamp to expel air from set. Close clamp.
- 8. Regulate rate of administration with flow control clamp.
sagent ®
Mfd. for SAGENT Pharmaceuticals
Schaumburg, IL 60173 (USA)
Made in Switzerland
©2026 Sagent Pharmaceuticals
Revised: April 2026