Medication-info.com Search Menu

Forzinity: Uses, Side Effects and Dosage

Updated:
Facts
Status:
Prescription (Rx)
Strength:
280 mg/3.5 mL
Active ingredient:

Patient information: uses, side effects, how to take - Forzinity

INSTRUCTIONS FOR USE

FORZINITY™ [for zin' i tee]

(elamipretide)

injection

This Instructions for Use contains information on how to inject FORZINITY. Read this Instructions for Use before you inject a dose of FORZINITY for the first time and each time you get a refill. This information does not take the place of talking to your healthcare provider about your medical condition or treatment. Ask your healthcare provider about any instructions you do not understand.

Important information you need to know before preparing and injecting FORZINITY:

  • Your or your child's healthcare provider will show you how to prepare and inject FORZINITY before you use the vial for the first time. It is recommended that FORZINITY injections be prepared and given by adults or adult caregivers.
  • FORZINITY is for injection under the skin (subcutaneous injection).
  • FORZINITY is injected 1 time each day, at the same time each day.
  • If a dose of FORZINITY is missed, skip that dose, and take the next dose of FORZINITY at the next scheduled time. Do not double a dose of FORZINITY.
  • FORZINITY vial contains enough medicine for more than 1 dose.
  • Do notmix FORZINITY with other medicines in the same syringe.
  • Only use disposable syringes and needles prescribed by your healthcare provider or included with your medicine. Using the wrong syringe can lead to a mistake in your dose and you could inject too much or too little FORZINITY.
  • Always use a new disposable syringe and needle for each injection.
  • Do notreuse or share your needles with other people.
  • Check the package containing the disposable syringe. If the package has been opened or damaged, do not use the syringe. Throw away the damaged syringe in an FDA-cleared sharps disposal container. See Step 8: "Throw away (dispose of) used needles and syringes."

Storing FORZINITY

  • Store unused vials of FORZINITY in the refrigerator between 36°F to 46°F (2°C to 8°C).
  • After the first dose, store opened vials in the refrigerator between 36°F to 46°F (2°C to 8°C) or at room temperature between 68°F to 77°F (20°C to 25°C).
  • Do notfreeze FORZINITY vials.
  • Throw away FORZINITY vials 8 days after first opening, even if some medicine is still left in the vial.

Keep FORZINITY, needles, disposable syringes, and all medicines out of the reach of children.

When using a new vial of FORZINITY:

  • Remove the carton from the refrigerator.
  • Make sure the name FORZINITY appears on the carton labeling.
  • Make sure the tamper evident seal is on the carton.
  • Remove the vial from the carton.
  • Allow the vial to sit at room temperature for at least 10 minutes.
  • Remove the "Instructions for Use" from the carton.
  • Write the "Discard After" date on the vial. Repeat this step for each new vial you open.
  • Return the carton containing unused vials to the refrigerator.
Step 1: Gather the following supplies on a clean flat, work surface (See Figure 1-A)
  • 1 vial of FORZINITY (See Figure 1-B). If using an opened vial stored in a refrigerator, allow the opened vial to sit at room temperature for at least 10 minutes.

The following supplies are not included in the carton:

  • 1 new disposable syringe with the needle attached for each injection (See Figure 1-C)
  • 2 alcohol wipes
  • cotton ball or gauze pad
  • sharps disposal container

Figure 1-A

Figure 1-B

Figure 1-C

Step 2: Check your FORZINITY vial
  • Make sure the name FORZINITY (elamipretide) appears on the vial label.
  • Check the expiration date (EXP) on the vial label (See Figure 2). Do notuse after the expiration date (EXP) on label.
  • Do notuse beyond the "Discard After" date written on the vial.
  • Make sure that the liquid in the vial is clear, colorless to yellow. Do notuse if the liquid is discolored or cloudy, or if the liquid has lumps, flakes, or particles.
  • Do notuse if the glass vial has cracks.
  • Do notuse if the plastic cap on a new vial is broken or missing.

Figure 2

Step 3: Prepare the vial
  • Wash your hands well with soap and water (See Figure 3-A)
  • Remove the plastic cap on the vial (if using a new vial) (See Figure 3-B). Throw away the plastic cap in the household trash.
  • Clean the top of the vial stopper with an alcohol wipe before each injection (See Figure 3-C).
  • Throw away the alcohol wipe in the household trash.

Figure 3-A

Figure 3-B

Figure 3-C

Step 4: Prepare the injection site

FORZINITY is injected directly into a layer of fat under your skin (subcutaneous injection).

  • Choose 1 of the following injection sites (See Figure 4).

    • stomach-area (abdomen), 2 inches away from belly button
    • outer area of the thigh
  • Change (rotate) the injection site daily with each injection to reduce the risk of skin problems. You may want to use a calendar or diary to record your injection sites.
  • Do notinject or give injections in the same location sites as other medicines.
  • Do notinject or give FORZINITY injections into areas where the skin is tender, red, bruised, hard, scarred or has stretch marks.

Figure 4

Clean the injection site with the second alcohol wipe.

  • Do nottouch, fan, or blow on the cleaned area.
  • Wait for about 10 seconds for the area to dry.
Step 5: Prepare syringe
  • Hold the syringe by the barrel with the needle cap pointing up and carefully pull the needle cap straight off and away from your body (See Figure 5-A).
  • Throw the needle cap into the sharps disposal container (See Figure 5-B).
  • Fill the syringe with air by pulling back on the plunger to the prescribed dose in milliliters (mL) (See Figure 5-C).
  • With the vial on a flat work surface and in the upright position, insert the needle straight down into the center of the vial rubber stopper (See Figure 5-D).
  • Slowly inject all the air from the syringe into the vial (See Figure 5-E).

Figure 5-A

Figure 5-B

Figure 5-C

Figure 5-D

Figure 5-E

Step 6: Withdraw the dose
  • Keep the needle inside the vial. Turn the vial and syringe upside down with 1 hand. Keep needle tip in the liquid (See Figure 6-A).
  • Slowly pull back on the plunger to withdraw your prescribed dose into the syringe (See Figure 6-B). Be careful not to pull the plunger out of the syringe.
  • Keep the needle inside the vial. Check for air bubble(s). Small air bubble(s) are normal. Large amounts of air bubble(s) may give you the wrong dose of FORZINITY.
  • If there are large air bubble(s), then gently tap the side of the syringe with your fingers until the large air bubble(s) rises to the top of the syringe (See Figure 6-C).
  • Slowlypush the plunger up to push the large air bubble(s) back into the vial (See Figure 6-C).
  • If no large air bubbles are present, gently pull back on the plunger again more slowly to fill the syringe to your prescribed dose.
  • Return the vial to an upright position and place it on the clean, flat work surface.
  • While holding the vial with 1 hand and the barrel of the syringe between the fingertips of your other hand, pull the needle straight out of the vial (See Figure 6-D).
  • Keep the syringe in your hand. Do notset it down.

Figure 6-A

Figure 6-B

Figure 6-C

Figure 6-D

Step 7: Take or give the injection
  • With 1 hand, pinch about 2 inches of skin at the injection site between your thumb and index (pointer) finger (See Figure 7-A). Pinching the skin helps to make sure that you inject the medicine under the skin (subcutaneous).
  • With the other hand, hold the middle of the syringe at a 90º degree angle to your body and insert the needle into the folded skin between the thumb and index (pointer) finger (See Figure 7-B).
  • Maintaining the 90º degree angle to your body, push the needle straight into the injection site (See Figure 7-B).
  • Make sure that you push the needle all the way into the skin. Do nothold or push on the plunger while inserting the needle.
  • After the needle is inserted, the skin no longer needs to be pinched.
  • Inject the solution by gently pushing the syringe plunger all the way until the syringe is empty (See Figure 7-C).
  • Take the needle out of your skin at the same angle you inserted it. Keep the plunger pushed in while removing the needle.
  • If there is bleeding, lightly press a cotton ball or gauze pad over the injection site.

Figure 7-A

Figure 7-B

Figure 7-C

Step 8: Throw away (dispose of) used needles and syringe
  • Throw away used alcohol wipes in the household trash.
  • Do not put the needle cover back on the needle or replace the needle.
  • Do not throw away (dispose of) needles and syringes in your household trash.
  • Throw away used needles and syringes in an FDA-cleared sharps disposal container right away after use (See Figure 8).
  • If you do not have an FDA-cleared sharps disposal container, you may use a household container that is:

    • made of heavy-duty plastic,
    • can be closed with a tight-fitting, puncture-resistant lid, without sharps being able to come out,
    • upright and stable during use,
    • leak-resistant, and
    • properly labeled to warn of hazardous waste inside the container.
  • When your sharps disposal container is almost full, you will need to follow your community guidelines for the right way to dispose of your sharps disposal container. There may be state or local laws about how you should throw away used needles and syringes. For more information about safe sharps disposal, and for specific information about sharps disposal in the state that you live in, go to the FDA's website at:

    http://www.fda.gov/safesharpsdisposal Do not dispose of your used sharps disposal container in your household trash unless your community guidelines permit this. Do not recycle your used sharps disposal container.

Figure 8

FORZINITY manufactured for:

Stealth BioTherapeutics Inc.

Needham, MA 02494

This Instructions for Use has been approved by the U.S. Food and Drug Administration. Issued: 9/2025

About this document

Source: FDA drug labeling via NLM DailyMed · Application number: NDA 215244 · View the label on DailyMed

Revision date stated in the text: September 2025

Found a mistake? Write to us via the contact page.

The information on this site does not replace the advice of a doctor or pharmacist.

Drug information for Forzinity

Rx or OTC
Prescription (Rx)?
  • This drug is available only with a prescription from a licensed healthcare provider.
  • Rx
Active ingredient Elamipretide hydrochloride 280 mg/3.5 mL
Dosage form Injection
Route Subcutaneous
Marketing status listed in the FDA NDC Directory
Company (applicant) STEALTH BIOTHERAPS
FDA approval NDA 215244New Drug Application (NDA) Approved September 19, 2025
Reference listed drug This is the reference listed drug (RLD) that generics are compared with.
Manufacturers 1 labelers list this drug on DailyMed
Packages (NDC)
Package
280 mg/3.5 mL – 3.5 ml in 1 vial / 4 in 1 carton NDC 72507-800-30

Source: FDA drug labeling via NLM DailyMed, data as of November 19, 2026. FDA data (DailyMed, Orange Book, Drug Shortages, enforcement reports). Not a substitute for the advice of a doctor or pharmacist.