Medication-info.com Search Menu

Fluorescein Package Insert

Updated:
Facts
Status:
Prescription (Rx)
Strength:
100 mg/mL, 250 mg/mL
Drug class:
Active ingredient:

Prescribing information (package insert) - Fluorescein

1 INDICATIONS AND USAGE

Fluorescein injection 10% (100 mg/mL) and 25% (250 mg/mL) is indicated in diagnostic fluorescein angiography or angioscopy of the retina and iris vasculature.

2 DOSAGE AND ADMINISTRATION

2.1 Dosing

Adult Dose

The recommended dosage of fluorescein injection 10% (100 mg/mL) and of 25% (250 mg/mL) is 500 mg via intravenous administration.

Pediatric Dose

For children, the dose is 7.7 mg/kg (actual body weight) up to a maximum of 500 mg, via intravenous infusion calculated on the basis of 35 mg for each 4.54 kg of body weight.

2.2 Preparation for Administration

Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration. Do not mix or dilute with other solutions or drugs.

Discard unused portion.

2.3 Administration

Inject the dose (over 5 seconds to 10 seconds is normally recommended) into the antecubital vein, after taking precautions to avoid extravasation. A syringe, filled with fluorescein, may be attached to transparent tubing and a 23 gauge butterfly needle for injection. Insert the needle and draw the patient's blood to the hub of the syringe so that a small air bubble separates the patient's blood in the tubing from the fluorescein. With the room lights on, slowly inject the blood back into the vein while watching the skin over the needle tip. If the needle has extravasated, the patient's blood will be seen to bulge the skin and the injection should be stopped before any fluorescein is injected. When assured that extravasation has not occurred, the room light may be turned off and the fluorescein injection completed. Luminescence usually appears in the retina and choroidal vessels in 7 seconds to 14 seconds and can be observed by standard viewing equipment.

Reduction in dose from 500 mg to 200 mg of fluorescein injection 10% may be appropriate in cases when a highly sensitive imaging system e.g., scanning laser ophthalmoscope is used.

3 DOSAGE FORMS AND STRENGTHS

Injection:

  • 10% (500 mg/5 mL) (100 mg/mL) of fluorescein sodium as a clear dark reddish orange color solution in a single-dose vial.
  • 25% (500 mg/2 mL) (250 mg/mL) of fluorescein sodium as a clear dark reddish orange color solution in a single-dose vial.

4 CONTRAINDICATIONS

4.1 Hypersensitivity

Fluorescein injection is contraindicated in patients with known hypersensitivity to fluorescein sodium or any other ingredients in this product. Rare cases of death due to anaphylaxis have been reported [see Warnings and Precautions (5.1) and Adverse Reactions (6.2)].

5 WARNINGS AND PRECAUTIONS

5.1 Respiratory Reactions

Caution should be exercised in patients with a history of allergy or bronchial asthma. An emergency tray should always be available.

If a potential allergy is suspected, an intradermal skin test may be performed prior to intravenous administration, i.e., 0.05 mL injected intradermally to be evaluated 30 minutes to 60 minutes following injection. Given the sensitivity and specificity of skin testing, a negative skin test is not proof that a patient is not allergic to fluorescein.

5.2 Severe local tissue damage

Extravasation during injection can result in severe local tissue damage due to high pH of fluorescein solution. The following complications resulting from extravasation of fluorescein have been noted to occur: Sloughing of the skin, superficial phlebitis, subcutaneous granuloma, and toxic neuritis along the median nerve in the antecubital area. Complications resulting from extravasation can cause severe pain in the arm for up to several hours. When extravasation occurs, the injection should be discontinued and conservative measures to treat damaged tissue and to relieve pain should be implemented. [see Administration (2.3) and Adverse Reactions (6.6)].

6 ADVERSE REACTIONS

6.1 Skin and urine discoloration

The most common reaction is discoloration of the skin and urine. Skin will attain a temporary yellowish discoloration. Urine attains a bright yellow color. Discoloration of the skin usually fades in 6 hours to 12 hours and usually fades in urine in 24 hours to 36 hours.

6.2 Gastrointestinal Reaction

The next most common adverse reaction is nausea. Vomiting, and gastrointestinal distress have also occurred. A strong taste may develop after injection.

6.3 Hypersensitivity Reactions

Symptoms and signs of hypersensitivity have occurred. Generalized hives and itching, bronchospasm and anaphylaxis have been reported. [see Contraindications (4.1) and Warnings and Precautions (5.1)]

6.4 Cardiopulmonary Reactions

Syncope and hypotension may occur. Cardiac arrest, basilar artery ischemia, severe shock and death may occur rarely. [see Warnings and Precautions (5.1)]

6.5 Neurologic Reactions

Headache may occur. Convulsions may rarely occur following injection.

6.6 Thrombophlebitis

Thrombophlebitis at the injection site has been reported. Extravasation of the solution at the injection site causes intense pain at the site and a dull aching pain in the injected arm. [see Administration (2.3) and Warnings and Precautions (5.2)].

8 USE IN SPECIFIC POPULATIONS

8.1 Pregnancy

Adequate animal reproduction studies have not been conducted with fluorescein sodium. It is also not known whether fluorescein sodium can cause fetal harm when administered to a pregnant woman. Fluorescein sodium should be given to a pregnant woman only if clearly needed.

8.3 Nursing Mothers

Fluorescein sodium has been demonstrated to be excreted in human milk. Caution should be exercised when fluorescein sodium is administered to a nursing woman.

8.4 Pediatric Use

Pediatric patients have been included in clinical studies. No overall differences in safety or effectiveness have been observed between pediatric and adult patients.

8.5 Geriatric Use

No overall differences in safety or effectiveness have been observed between elderly and other adult patients.

11 DESCRIPTION

Fluorescein injection, USP contains fluorescein sodium, a diagnostic aid, in a sterile solution for use intravenously. It is a clear dark reddish orange solution with a pH of 8.0 to 9.8 and an osmolality of 572 mOsm/kg to 858 mOsm/kg for the 10% and 1,800 mOsm/kg to 2,200 mOsm/kg for the 25%. Its chemical name is spiro[isobenzofuran-1 (3H),9'-[9H]xanthene]-3-one,3'6'- dihydroxy, disodium salt. Its molecular weight is 376.27 g/mol. The active ingredient is represented by the chemical structure:

Fluorescein injection, USP 10% (500 mg/5 mL) (100 mg/mL) contains:

  • Active ingredient: fluorescein sodium, USP (10 % w/v, 100 mg/mL), equivalent to 88.3 mg/ml of fluorescein
  • Inactive ingredients: sodium hydroxide and/or hydrochloric acid may be used to adjust pH (8.0 to 9.8) and Water for Injection.

Fluorescein injection, USP 25% (500 mg/2 mL) (250 mg/mL) contains:

  • Active ingredient: fluorescein sodium, USP (25% w/v, 250 mg/mL), equivalent to 220.8 mg/ml of fluorescein
  • Inactive ingredients: sodium hydroxide and/or hydrochloric acid may be used to adjust pH (8.0 to 9.8) and Water for Injection.

12 CLINICAL PHARMACOLOGY

12.1 Mechanism of Action

Fluorescein sodium responds to electromagnetic radiation and light between the wavelengths of 465 nm to 490 nm and fluoresces, i.e., emits light at wavelengths of 520 nm to 530 nm. Thus, the hydrocarbon is excited by blue light and emits light that appears yellowish green. Following intravenous injection of fluorescein sodium in an aqueous solution, the unbound fraction of the fluorescein can be excited with a blue light flash from a fundus camera as it circulates through the ocular vasculature, and the yellowish green fluorescence of the dye is captured by the camera. In the fundus, the fluorescence of the dye demarcates the retinal and/or choroidal vasculature under observation, distinguishing it from adjacent areas/structures.

12.3 Pharmacokinetics

Distribution

Within 7 seconds to 14 seconds after intravenous (IV) administration into the antecubital vein, fluorescein usually appears in the central retinal artery of the eye. Within a few minutes of IV administration of fluorescein sodium, a yellowish discoloration of the skin occurs, which begins to fade 6 hours to 12 hours after dosing. Various estimates of volume of distribution indicate that fluorescein distributes into interstitial space (0.5 L/kg).

Metabolism

Fluorescein is metabolized to fluorescein monoglucuronide. After IV administration of fluorescein sodium (14 mg/kg) to 7 healthy subjects, approximately 80% of fluorescein in plasma was converted to glucuronide conjugate after a period of 1 hour post dose.

Excretion

Fluorescein and its metabolite are mainly eliminated via renal excretion. After IV administration, the urine remains slightly fluorescent for 24 hours to 36 hours. A renal clearance of 1.75 mL/min/kg and a hepatic clearance (due to conjugation) of 1.50 mL/min/kg have been estimated. The systemic clearance of fluorescein was essentially complete by 48 hours to 72 hours after administration of 500 mg fluorescein.

13 NONCLINICAL TOXICOLOGY

13.1 Carcinogenesis, Mutagenesis, Impairment of Fertility

There have been no long-term studies done using fluorescein in animals to evaluate carcinogenic potential.

16 HOW SUPPLIED/STORAGE AND HANDLING

Fluorescein injection, USP 10% is supplied in a single-dose 5 mL glass vial with clear dark reddish orange color solution filled in clear glass vial with gray colored rubber stopper and red aluminum flip-off seal.

(NDC 70710-2045-9) 5 mL, single dose vials in a package of 12.

Fluorescein injection, USP 25% is supplied in a single-dose 2 mL glass vial with clear dark reddish orange color solution filled in clear glass vial with gray colored rubber stopper and red aluminum flip-off seal.

(NDC 70710-2046-9) 2 mL, single dose vials in a package of 12.

Store Fluorescein injection, USP at 20°C to 25°C (68°F to 77°F) [See USP Controlled Room Temperature]. Protect from freezing. Discard unused portion.

17 PATIENT COUNSELING INFORMATION

After administration of fluorescein sodium, skin will attain a temporary yellowish discoloration. Urine attains a bright yellow color. Discoloration of the skin usually fades in 6 hours to 12 hours and usually fades in urine in 24 hours to 36 hours. [see Warnings and Precautions (6.1)].

Manufactured by:

Zydus Lifesciences Ltd.

Vadodara-391510, India

Distributed by:

Zydus Pharmaceuticals (USA) Inc.

Pennington, NJ 08534

Rev.: 04/26

About this document

Source: FDA drug labeling via NLM DailyMed · Application number: ANDA 218651 · View the label on DailyMed

Revision date stated in the text: April 2026

Found a mistake? Write to us via the contact page.

The information on this site does not replace the advice of a doctor or pharmacist.

Drug information for Fluorescein

Rx or OTC
Prescription (Rx)?
  • This drug is available only with a prescription from a licensed healthcare provider.
  • Rx
Drug class Diagnostic Dye
Active ingredient Fluorescein sodium
Dosage form Injection
Route Intravenous
Marketing status listed in the FDA NDC Directory
Company (applicant) ZYDUS LIFESCIENCES
FDA approval ANDA 218651Abbreviated New Drug Application (ANDA) – generic drug Approved June 1, 2026
Therapeutic equivalence (TE) code APCodes starting with A mean the FDA rates the drug therapeutically equivalent to its reference drug (Orange Book).
Generics Ak-fluor with the same TE code
Manufacturers 5 labelers list this drug on DailyMed
Packages (NDC)
Package
100 mg/mL – 5 ml in 1 vial, single-dose / 12 in 1 carton NDC 70710-2045-1
250 mg/mL – 2 ml in 1 vial, single-dose / 12 in 1 carton NDC 70710-2046-1

Source: FDA drug labeling via NLM DailyMed, data as of November 16, 2026. FDA data (DailyMed, Orange Book, Drug Shortages, enforcement reports). Not a substitute for the advice of a doctor or pharmacist.